 |
 |
|
Digital Dispenser
S-600
 |
Features
- Operating conditions are digitally controlled. Dispensing
pressure, suction pressure (negative pressure) and dispensing
time are numerically displayed.
- The circuitry is so designed as to simplify the connection
with FA equipment.
- The dispenser can be freely combined with peripheral units
or systems such as a syringe, pressure-operating valve,
spray valve, plunger pump and so forth.
Specifications
| Control |
electro-pneumatic control |
| Air pressure source |
5.0 ~ 9.9 kgf/cm2,
lubrication-less dryer |
| Dispensing time |
0.005 ~ 9.999 per second, 0.05
~ 99.99 per second* |
| Dispensing pressure |
0.2 ~ 7.0 kgf/cm2 (digital
display) |
| Vacuum |
0 ~ 0.950 kgf/cm2 (digital display)
|
| Start signal |
NO contact or open collector connection
|
| Operating signal |
timer synchronization, a-contact
output (28V DC, 0.25A max.) |
| Emergency stop |
NO contact or open collector connection
|
| Power source |
100V AC, 50/60 Hz, 25W, 115 /
200 / 220V* |
| Externally-set input |
5V DC, 16mA * 8* |
| External dimensions |
200 mm wide x 60 mm high x 235
mm deep |
| Weight |
3.2kg |
| Standard accessories |
AC cord (2-m long), metallic plug
receptacle for input, operation manual |
*Asterisked specifications are
optional at the factory. So, dispensers with different specifications
are to be shipped after necessary changes and adjustments are
made. |
Accessories
Possible to select any combinations according to operating conditions.
|
Syringe
adapter tube(1 meter long) (1-piece pack)
- SAT-10 (for 10 cc)
- SAT-30 (for 30 cc)
Syringe switch
This is used for manual operation with the magic hand fixed.
(1-piece pack)
Syringe (50-piece pack)
Taper nozzle (50-piece pack)
Head orifice diameter
- φ1.5
- φ1.2
- φ0.8(Overall length: 32 mm)
- φ0.6
- φ0.4
*φ= diameter
Custom needle
To be manufactured according to the user's requirements
Needle (standard needle length: 13 mm)
(M) Metallic type (1-dozen pack)
(P) Needle with a plastic base
(Disposable: 50-piece pack)
P.P needle
Suitable for liquids for which metallic needles cannot be used.
|
Table of internal/external diameters of needles
(Use for determining dispensing volumes.)
| (M) |
(P) |
Gauge |
Internal diameter |
External diameter |
| * |
|
13G |
2.00 |
2.40 |
| * |
* |
14G |
1.70 |
2.10 |
| * |
* |
15G |
1.45 |
1.82 |
| * |
* |
16G |
1.26 |
1.65 |
| * |
* |
17G |
1.12 |
1.47 |
| * |
* |
18G |
0.91 |
1.25 |
| * |
* |
19G |
0.70 |
1.06 |
| * |
* |
20G |
0.60 |
0.90 |
| (M) |
(P) |
Gauge |
Internal diameter |
External diameter |
| * |
* |
21G |
0.51 |
0.80 |
| * |
* |
22G |
0.40 |
0.71 |
| * |
* |
23G |
0.33 |
0.64 |
| |
* |
24G |
0.28 |
0.55 |
| * |
* |
25G |
0.26 |
0.51 |
| |
* |
26G |
0.23 |
0.45 |
| * |
* |
27G |
0.19 |
0.41 |
| * |
|
28G |
0.16 |
0.35 |
Internal/external diameters of (M) and (P) do not
always correspond with each other.
|
|
 Constant
volume dispensing valve
A great variety of types to choose according to
applications.
|
|
|
 |
|
top
> one-component material dispenser
