 |
 |
|
Circulation Type MAK Dispenser
MAK-22C
|
Use
- Measuring, mixing and dispensing of two-component resins
such as urethane, epoxy, and silicone
Features
- Adapted to high viscosity materials containing fillers:
the employment of a special measuring pump enables accurate
measurement of materials containing fillers.
- Two-axis circulation system: the employment of a newly
developed switching valve for circulation and dispensing
enables highly accurate dispensing.
- Variable mixing-ratio system: it is possible to select
various mixing ratios readily, seeing the digital panel.
Standard Specifications
| Usable materials |
two-component resins (such as
epoxy, urethane and silicone) |
| Possible mixing ratios |
100:100 ~ 100:5
|
| Allowable viscosity |
below 1,000,000 mPa.s (Materials
with high viscosity need to be heated before they are
used.) |
| Pot life (Curing time) |
more than 5 minutes |
| Dispensing volume |
0.1 cc per second ~ 40 cc per
second (cannot be dispensed by one dispenser) |
| Dispensing accuracy |
within plus/minus 3% |
| Dispensing method |
timer-dispensing and continuous
dispensing |
| Mixing method |
forced mixing by a power mixer
(motor-driven dynamic mixer) |
| Measuring method |
volume-measuring rotary pump |
| Material tank |
1 liter ~ 100 liters |
| Cleaning method |
alternate flushing of air and
cleaning water (equipped with a 10-liter cleaning tank) |
| Temperature adjustment |
material tank and material line
Gelling-preventive function: equipped with a gelling-prevention
timer as standard |
| Gelling-preventive function |
equipped with a gelling-prevention
timer as standard |
| Alarm |
abnormal dispensing pressure and
curing |
| Power source |
200 V AC, 3-phase |
| Air source |
0.5 Mpa for ordinary use |
|
Non-circulation Type MAK Dispenser
MAK-22
|
Use
- Measuring, mixing and dispensing of two-component resins
such as urethane, epoxy, and silicone
Features
- Enables to meter, mix and dispense low-to-high viscosity
materials.
Standard Specifications
| Usable materials |
two-component resins (such as
epoxy, urethane and silicone) |
| Possible mixing ratios |
100:100 ~ 100:5
|
| Allowable viscosity |
below 1,000,000 mPa.s (Materials
with high viscosity need to be heated before they are
used.) |
| Pot life (Curing time) |
more than 5 minutes |
| Dispensing volume |
0.1 cc per second ~ 40 cc per
second |
| Dispensing accuracy |
within plus/minus 3% |
| Dispensing method |
timer- dispensing and continuous
dispensing |
| Mixing method |
forced mixing by a power mixer
(motor-driven dynamic mixer) or mixing by a static mixer
|
| Measuring method |
volume-measuring rotary pump |
| Material tank |
1 liter ~ 100 liters |
| Cleaning method |
alternate flushing of air and
cleaning water (equipped with a 10-liter cleaning tank) |
| Temperature adjustment |
material tank and material line
|
| Gelling-preventive function |
equipped with a gelling-prevention
timer as standard |
| Alarm |
abnormal dispensing pressure and
curing |
| Power source |
200 V AC, 3-phase |
| Air source |
0.5 Mpa for ordinary use |
|
|
|
 |
|
top
> Two-component Material Dispenser
