Static Electricity & Dust Removing System
JJN-1000
|
Application
- Removal of static electricity and dust from precision
appliances before assembled.
- Removal of static electricity and dust from cases, covers
and conveying trays of electronic parts and appliances.
- Removal of static electricity and dust from plastics for
foods and paper cups.
- Removal of static electricity and dust from molded plastics
before coated.
Features
- Dust is efficiently removed by neutralizing static electricity
charging on work pieces with ionized air. Once removed,
dust hardly sticks onto work pieces again.
- Dust is sucked and discharged by force. So, there is no
fear of dust scattering inside of the dust-removing chamber.
- Various dust-removing nozzles (for compressed air) are
prepared according to the kinds of materials to process.
They include a static electricity removing ion nozzle, adjustable
nozzle, driving nozzle, and so forth.
- As compressed air is used, running costs are considerably
low.
- It is possible to design and manufacture the system according
to the kinds of work pieces and operating conditions.
- The dust-removing chamber is made airtight and soundproof.
So, it leaks little air sound outside.
Specifications
| Processing capacity |
4-workpieces set x 2 per batch
|
| Cycle time |
shorter than
60 seconds |
| Setting and taking off of work
piece |
manual |
| Operation panel |
touch panel |
| Safety |
work piece front inlet/outlet
- safety screen (area sensor) x 2 sets
- laser sensor for transparent tray confirmation x 2 sets |
| Static electricity removing system |
air-ionizing
BF-4 x 2 units
air-removing electrode BUAS type x 2 units
(high tension power source SAT-10) |
| Air blow |
air nozzle - 104 pieces x 2 sets
(26 pieces per workpieces)
Air velocity - 40 ~ 50 meters per second |
| Ventilation fan |
AH-500 x 2 units - maximum blast
volume / 20 cm3 per minute |
| Air tank capacity |
100-liter x 2 units |
| Noise (during operation) |
lower than 75
db |
| Work piece area |
550 mm x 300 mm x 25 mm (maximum)
300 mm x 300 mm x 25 mm (minimum) |
| External dimensions |
1700 mm x 2000 mm x 2100 mm |
| Weight |
approximately 1500 kg |
| Power source |
200V AC, 3-phase,
1.5 KW |
| Air source |
0.5 Mpa or over (1000 liters per
minute) |
|
top
> Static Electricity & Dust Removing System
