 |
 |
|
Company
History
| July 1988 |
Establishment |
| September 1988 |
Developed a two-component material
dispenser and a vacuum resin-molding system, and put them
on the market. |
| September 1992 |
Moved to the present head office
and factory building. |
| December 1993 |
Developed an abrasion-resistance
tester and put it on the market. |
| April 2000 |
Commercialized a non-cleaning
type mixer for two-component material dispensers, and
had it patented. |
| March 2001 |
Opened a liaison office in Shanghai,
China. |
| May 2001 |
Developed a static electricity
and dust removing system and put it on the market. |
| September 2002 |
Began importing and selling industrial
products made overseas. |
| December 2004 |
Opend sales office and factory
in Shanghai, Chaina |
| May 2005 |
Moved to a newly built head office
and factory. |
| October 2007 |
Tokyo Sales Office moved to a
new and larger place |
|
Company
Profile
| Company Name |
M & K Co., Ltd. |
| Address |
12,
Torashinden
Odaka-cho,
Midori-ku,
Nagoya,
459-8001
TEL: +81 (0) 52 621-3100
FAX: +81 (0) 52 621-0030 |
| Establishment |
July 1988 |
| Capital |
20 Million Yen |
| Representative Director |
Kenji Murakami |
| Number of Employees |
12 (as of April 2005) |
| Office |
Head Office and Factory
12, Torashinden Odaka-cho, Midori-ku,
Nagoya, Japan,459-8001
TEL: +81 (0) 52 621-3100
FAX: +81 (0) 52 621-0030
Tokyo Sales Office
Tama Centre No.2 building 202, 5-2-14
Utsukushigaoka, Aoba-ku, Yokohama,
Japan, 225-0002
TEL : +81 (0)45-902-3305
FAX : +81(0)45-903-3697
Shanghai Office (Shanghai, China)
12-C, No.373 Jiangning Road, Shanghai,
China, 200041
TEL&FAX:+86-21-62531188
Shanghai Factory (China)
Fengxian, Pudong, Shanghai, China |
| Business Activity |
Manufacture and sale of automatic measuring,
mixing and dispensing systems for epoxy, urethane, silicone
and polyester resins, automatic vacuum mixers, and other
special machines |
| Main Products |
"MAK Series" automatic mixing and dispensing systems
for epoxy,
urethane
and silicone
resins,
"MAK-R
Series"
automatic
measuring
and dispensing
systems
with XYZ
driving
system
for two-component
materials,
"VOGUE
Series"
vacuum
degassing
and mixing
systems
for artificial
marble,
automatic
prototype
resin-molding
system
"PROTO
II"
and automatic
vacuum
resin-molding
system
for electronic
parts
|
| Main Banks |
UFJ Bank, Aichi Bank |
| Clienteles |
Panasonic Corporation, Sanyo Electric, Toshiba
Corporation, Mitsubishi Electric Corporation, Mitsubishi
Chemicals, Mitsui Chemicals, TOTO, Kyocera Corporation,
Toyota Motor Corporation, Aishin Seiki, Toyoda Gosei,
Bridgestone, Yokohama Rubber, Honda Engineering, Nitto
Denko, Hitachi, Daikin Industries, Koito Industries, Koito
Manufacturing, Denki Kagaku Kogyo, Furukawa Electric,
Sumitomo Bakelite,Soken Chemical & Engineering, Pioneer |
|
Access
<Car>
Nagoya Expressway -> No. 3 Odaka IC. Get
off the Odaka IC and turn to the left at the
first traffic signal. Turn to the left at
the "Ohirato" intersection. Turn
to the left at the "Shimoshioda"
intersection.pass"Torashinden" intersection,
at the left corner of the next intersection.
<Public traffic facilities>
Take a local train of Tokaido Line from Nagoya Station and get off
at "Odaka Station." It takes about ten minutes by taxi.
Or, take a local train at Meitetsu Nagoya Station and get off at Nawa
Station. It takes about twenty minutes on foot.
From Tokyo, take a bullet train and get off at Nagoya station. It
takes about one hour and forty minutes.
From Osaka, take a bullet train and get off at Nagoya station. It
takes about one hour.
<Airplane>
From Central Japan International Airport(Nagoya), about 30 minutes
by car or taxi, or take Express or Limited Express train bound for
Nagoya, and transfer to Local train at Ohtagawa station and then get
off at "Nawa station". It takes about 50minutes. |
|
 |
|
top
> about us
