Vacuum Prototype Resin-molding System
PROTO II
|
Application
- With the master model as a prototype, this vacuum resin-molding
system performs high- precision and high-property molding.
Features
- High vacuum in a short time. A large-capacity vacuum pump
(600 liters per minute) is used for this size: four minutes
to reach 0.3torr.
- Many pieces of standard equipment
1. Automatic mixing unit (with an elevating cylinder)
2. Automatic suction valve and automatic release valve
3. Manual air release/adjusting valve
4. Internal lighting system for vacuum tank
- Movable to anywhere. Equipped with 4-wheel caster leveling
bolts.
Specifications
| Vacuum tank internal dimensions |
400mm wide x 400mm deep x 700mm
high |
| Internal dimensions for actual
operation |
400mm wide x
400mm deep x 430mm high |
| Main agent / cup capacity |
300 cc, 500 cc |
| Curing agent / cup capacity |
300 cc |
| Vacuum pump |
exhausting volume - 600 liters
per minute |
| Power source |
200V AC, 3-phase, 0.9 KW |
| Weight |
400 kg |
|
top
> Vacuum Resin-molding System 
